2018 Chevy Camaro Oil Light Reset
2Ignition ON activate the Relearn mode with the driver information center DIC display controls.
2018 chevy camaro oil light reset. If your engine warning light is illuminated often itll be accompanied by some unusual symptoms these could include a lack of power as the car has gone into safe mode to protect it. Turn the ignition to run one position before starting engine. Turn the ignition switch or start button to ON II with the engine off.
If the Change Engine Oil Soon message is not on the system is reset. It is really only gets use in an emergency situation. If the Change Engine Oil Soon message is not on the system is reset.
After the smart maintenance screen is shown press and hold the ENTER button for 10 seconds. This is the process to reset the change oil light on a 1999 Chevrolet Camaro. If it is on turn the ignition off and repeat steps 1-2.
Press the Average Speed and Range buttons until the display resets to 100. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. Press and hold the SETRESET button on the Driver Information Center for more than 5 seconds on vehicles without DIC use the TRIP reset stem for SETRESET Press the OPTION button on the DIC until Engine Oil Monitor appears on the screen.
If the CHANGE OIL SOON light blinks the system is. Press the SETCLR button on some models the check-symbol button while the oil life display is active. Turn the ignition key to the run position.
Service StabiliTrak Symptoms. Turn the ignition off. Turn the ignition key to the run position.